
1 / 71 / 7
Building instructions
Gym pullup and dips bar DIY plan
6 ratingsDIY Plan for building Outdoor Gym: Pullup and Dips Bar – a modern, stable construction with double pullup bars and a dips section, complete with drawing and assembly steps.
About the project
DIY Plan for building Outdoor Gym: Pullup and Dips Bar. This is a stable and well-thought-out construction for bodyweight training outdoors, where a straight pullup frame is combined with a clear dips section. The design language is modern and minimalist with straight lines and proportions that make the facility easy to place in a garden or yard. The pullup part consists of two parallel bars at different heights for varied grip width and progression, while the dips section has two horizontal bars at a lower level suitable for dips, knee raises, and static holds. The construction is tied together with cross beams and a supporting frame that provides high lateral stiffness and safe use under repetitive loads. The anchoring is done in the ground with cast foundations for a stable and secure result over time.
The range of use is broad: here you train chins, pullups, dips, leg raises, and core, but also assisted variants for beginners as well as explosive exercises for more advanced users. The project is built in about 1–2 days and the difficulty level is Medium. You will need a miter saw, drill, hammer, level, shovel, and precise measuring tools for marking the foundations and accurate cutting. The drawing shows all dimensions, center distances, and fastening points and guides the assembly order step by step so that each moment lands correctly without guessing.
The DIY Plan includes a complete material list, cutting and sawing instructions, as well as assembly steps. When everything is in place, you will have a robust outdoor gym that encourages regular training in fresh air and can easily be adjusted in height or width if you want to customize the stations for different users.
Digital delivery
This is a digital guide. The guide is delivered as a PDF that can be downloaded immediately after purchase or through the order email sent to the specified email address.
The guide contains the information needed to build the product illustrated on this page.
Table of contents of the guide:
- Introduction
- Tools
- Sawing
- Mounting
At Egenbyggt, we work hard to deliver high quality. Nevertheless, errors or omissions may creep into our guides and the information we provide on the site. We reserve the right to do so.
If you are not satisfied with a guide you have purchased, please contact us.
Read more: Terms of purchase .
How the guide works
Step 1
Get your building materials
Take the shopping list to your local hardware store. In many places, you can borrow a trailer for free when you buy your materials.
The shopping list included with the DIY guide contains:
- Timber dimensions and lengths
- Fasteners
- Accessories (varies depending on the project).
Step 2
Saw the parts
All parts have a clear drawing and are marked with a letter.
This makes it easy to saw all the parts needed for the build.
Step 3
Assemble
Once the parts are sawn, it's time for assembly.
The guide shows you step-by-step how to assemble the parts using illustrations and concise information for each stage.
Experience the magic when everything fits together perfectly and the final result takes shape.
Done
Building materials and tools
Below is a list of materials and suggestions for building tools. A complete shopping list with quantities and sawing instructions is available when you buy the DIY guide.
Building materials
Tools
Miter and Crosscut Saw
Screwdriver
Hammer
Spirit level
Shovel
Measuring tools
Ratings and reviews
6 ratings
Only customers who have purchased this building plan can leave a review.
Saknade måtten för stödvirket. Förutom det så var det en bra ritning.
Enkelt att förstå. Snabb leverans. Skitbra, helt enkelt!
Fantastico producto, super bien explicado y claro.

